Repair My Windows And Doors

Repairs To Upvc Windows Isn’t As Difficult As You Think

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they generally fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you’re planning to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass, so that any shards fall on the fabric rather than on the floor, where they could be trodden under and cause further damage.

It’s a great idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is large, you may think about an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sagging. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it’s crucial to act fast to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. First, you’ll need to unblock the windows so you can get at the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you’ve repositioned the hinges, shut your window and test it for fitting. If you’re happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it’s crucial to replace the seal as quickly as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen up. Most often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Fortunately, it’s easy to fix the handle of a window that is loose yourself. First, you’ll need to close the window and perform an experiment fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn’t, you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it’s important to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any competent DIYer. Based on the severity of the issue the caulking used previously may need to be removed before a new layer can be put on. When it comes to uPVC repair, you should avoid ‘over-caulking’. This will make your window more difficult to clean and decrease its energy efficiency.

Verify that the drainage holes have no debris inside them and that the sill pan is angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely the problem is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens with the breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It’s very simple to change the hinges on a window but it’s much simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor Repairmywindowsanddoors.Co.Uk installation in the factory. This can often be resolved by sending us a photo on our website. We will be happy to give you suggestions.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. This should be done at least every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges may also become disaligned as a result of wear, which can cause an opening where the sash meets frame. If they’re beyond repair, it might be required to realign them. In addition, the interlock could be disaligned. This happens on the hinge’s side, and might require to be cleaned. In some cases it is possible to replace them.

The seals may wear out or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert as soon as you can.